Front page | Tekla Download.تحميل برنامج tekla structures sp4 x64 - Best Free File
The columns may be different profile sizes, similar profile sizes but with different class numbers, different rotations, and even different bottom of column elevations yet the Base Plate Applicator will automatically load the appropriate saved base plate settings and place the base plate at the bottom start point of the selected columns that match a rule in the schedule. This saves a lot of time for the user and helps increase the accuracy of the appropriate base plate details being applied to the correct columns.
This tool allows a user to select a group of base plate details system or custom components and automatically generate blown up sections and details on a general arrangement drawing based on the connection codes defined on the general tab of component dialog boxes in the model.
This tool creates consecutive beams with any profile and can be used for bridge modelling. The tool uses an external excel spreadsheet where you define start points for the beam segments and which profile to use.
Custom profiles can be created in Tekla Structures. A sample model ExtrusionTestModel is attached to the installation package. The sample model contains extension presets with a couple of sample profiles and two sample spreadsheets these are located in the folder excel in the sample model folder.
This tool simply adds a node a customized beam type object at the end of every selected beam type part within Tekla Structures. It will sequentially assign a number to each of the nodes applied. If many of the selected beams have similar endpoints, duplicate nodes will not be created.
Nodes can be moved around in the model or through the extension interface, and the associated beam ends will follow. You can then create reports or drawings showing the nodes and their respective numbers. The node parts are given the name NODE and can be viewed with a customized view Plugins for continuous reinforcement of consequtive beams of imaginative shapes. Can be used representation. Limitations: The plugins can proces max input parts in one go, and the beam sequence cannot bend more than 90 degrees.
These cases can be reinforced in multiple sections. Note: In the Mainbar plugin you should use the option "single bars" if possible, as rebar groups aren't flexible enough to follow complex geometry. You can see the values in the UDA field when inquiring the part. You can use that UDA in reports to calculate the real volume of the part, and also weight.
In offshore drawings it is traditional to position the short point of the starting end at the top of the drawing view. This tool helps users to create workshop drawings of bent or folded parts and plates containing both the folded and unfolded views in a single drawing. Use Attach Part Wizard component to easily attach parts which are already be detailed. Bolts, edge chamfers, welds, and reinforcements associated to an attaching part are lost when the part is attached with the attach part command.
The attach part wizard handles these details for you by reassigning them to the newly formed part so the details are not lost. Use this tool to filter GA drawings according to selected parts, or to find and select parts in the model based on the selected drawings. This tool allows to to perform different checkings over a model.
Welding Tools is a tool kit for easier modeling and editing of complex polygon welds. A toolset for defining offset or gap between members. Use these tools before adding any connections, details or plugins to offsetted members. This little tool helps you to find out which Tekla Structures version was used to build the model, custom component or sketched profile - without having Tekla Structures.
Just drag'n drop a. The reinforcement data can only be exported from cast unit drawings, general arrangement GA drawing is not supported. This extension includes two new tools. Measure tool allows to measure distances between any points,edges or surfaces in the model. Embed placing shows a preview distances before component is inserted. This extension is used to create customer configuration. Firm folder and role file will be created.
It can also be used to set up configuration sent by a customer. Use this extension to change the inputs of selected components. This actually recreates the component, so numbering is not kept.
The In-Model Reviewer application allows engineers, architects and contractors to perform a mode based review of steel or concrete fabricator shop drawing submittals. Fabricators can package up assemblies or cast units by submittal and deliver them to the review team. Review comments made in the Tekla model are written to 2d pdf drawings.
Revision handling of submittals is supported. To learn more about this process, please watch the videos below or visit www. BAMTEC is a particularly cost effective procedure for planning, manufacture and installation of surface reinforcement for reinforced concrete slabs, reinforced concrete floors and reinforced concrete walls.
These contain exclusively uni axially installed round steel bars which are combined into an assembly unit using transverse steel bands. This extension imports. TEC production files in order to visualize the reinforcement carpet in the Tekla Structures model. This tool allows you to save your navigation through the model in perspective mode, then play it back or scroll through it.
You can save the navigation to file, and load multiple saved navigation files for later use. This is similar to the older Tekla Structures Model Reviewer functionality where you would store your views, then press the play button and you would be flown through each of th saved views in your model.
This application was designed to process point cloud data files and to make those accessible in Tekla Structures. The application allows to optimize downsample point clouds, trim point clouds and to split the resulting reference files DWG, DXF into single packages. This plug-in can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes, u-bars in top flange and longitudinal bars along the beam. This extension allows user to check individual lengths of rebars into rebar groups.
It also allows user to handle rebar groups easily. The Wraparound Dimensioning application helps create dimensions for pipe or tube ends in wraparound template drawings.
These dimensions can be used in layout of points for manual cutting or quality assurance. The addon reports the model part orientation and related information in a dialog, which rows can be sorted. This little add-on was designed to enable saving the Tekla Structures model and drawing based on a defined time intervall.
The standard auto save feature in Tekla Structures works based on activities in the model or in the drawing instead. With this application a Tekla Structures user can install the needed configuration files to be able to utilize 3Dconnexion devices such as SpacePilot with Tekla Structures.
The installation of 3Dconnexion's own driver is not needed. Allows erectors and field superintendents to place cranes and animate their movements for planning and to prevent construction clashes on the jobsite.
The user can simulate lifting assemblies and cast units into place from a lay down area. Also a report can be generated showing a list of the distance and weights assemblies are from the center of the tower crane.
Use this tool in conjuntion with the Tekla Animator extension. Reference Model Objects can't be used and you need to have a model authoring configuration to use this such as Engineering or a Detailing configuration. This tool only supports Tower Cranes not Crawler Cranes. Two components to create intelligent linear and radial copies of objects. Choose the directions and intervals to create the copies, also choose if you want to copy only selected objects or associated objects to the selected objects.
Use this extended application to create tasks from phases, from lots, or from phases with child tasks by lots. The assemblies in the phase or lot are also added to the tasks.
The AutoBolt plug-in helps in the modeling of bolts in complex situations. AutoBolt makes bolt creation easier by automatically identifying the best rotation for bolts and will automatically find and bolt nearby parts. AutoBolt also allows the user to specify as one group a set of bolts which wi be split over several parts, such as a splice connection. This tool has been moved to Tekla Structures installation from version You can find it in Component Catalog.
This tool creates a ring plate detail around one input part. It creates a center cut to plate and adds plate to input part's assembly by default, but doesn't create any weld s - please use "Welding Tools" Extension for accurate polygon weld modeling.
Note: After installation this detail can be started from Component Catalog. This allows users to quickly copy at an offset distance any beam framing geometry in plan views of the Tekla Structures 3D Model.
Installs to With help of this Tekla Structures extension the user can check for high-strength bolt connection in the model. In case a high-strength bolt connection is created with one washer instead of two the missing second washer is added automatically. With this little tool it is easy to check part cuts and sizes. The part and cut information are shown in the application dialog and can be saved to a report file or to a text file.
The new and improved Tekla Structures support tool. This new version of the tool includes a streamlined User Interface to make contacting your local Tekla support team simple.
The Framecad integration extension is a set of tools used to integrate Tekla Structures and Framecad Detailer using Framecad's. It does this by comparing advanced options in the open model with your default advanced option settings. It only applies to model specific options. New intuitive functionality for editing rebar allowing easy modification to accommodate changes to rebar spacing, hooks, diameter and bending radius. This application makes a copy of selected GA Drawings inside the same model.
Modeling shoring towers and deck supports allows contractors to do sourcing and scheduling with accurate data instead of calculated values. Engineers have a new possibility to add more services based on the model. Modeling shoring towers allows you to create accurate drawings and reports from model. With Tekla Structures Due to this saved settings will have a different number in the file extension as well.
Opening a model created with an older version of Tekla Structures the saved settings of Unitechnik export wil not be found. The existing saved setting files must be renamed to be found from the new Unitechnik export component. To simplify that task small application has been created to automatically modify the file name of the saved settings.
We are looking for feedback on the use cases and value of this tool. Please post ratings and comments below. A set of 15 components, which are useful for detailing the wall connections. They can also be used to connect the middle cast-in-place layers inside the double-walls.
They will work only on panels with 2 input points no 'polybeam' panels. They are meant to be used with the Elementation tools. This tool has been included in Tekla Structures installation from version The plugin is used because it is up to 20X faster than scanning the model from an external.
NET application. The plugin scans the model for the repor or user attribute data and writes it to an intermediate XML file in your model folder. PDF document with basic instruction included. ZIP contains the scripts for version 14 onwards. These tools are similar to the line editing functionalities that appear in 2D CAD applications but instead are used for beams in the model. This allows users to utilize those familiar tools as they migrate into modeling structural framing in the 3D environment of Tekla Structures.
These tools also reduce the number of commands required by the Tekla Structures user when modifying sloping, or skewed framing geometry in the model. Use this tool to create and see a preview of a selected drawing. Note: when the creation of images starts leave the extension finish and don't try to open other applications while is running, you can cancel the process if needed. The add-on uses other applications which need to be installed first. Celsa Steel Service is one of Europe's leading manufacturers of reinforcement products.
This extension exports reinforcement to be further processed with Celsa's reinforcement report application 'Q-armering'. This little extension was designed to change the thickness or the height of a wall very quick, with very minor user input. Just select what to change, enter the new value and apply the change. These are included in Tekla Structures version installation from TS Use components to create everything required [incl.
This Tekla Structures add-on was designed to modify Unitechnik open interface for the precast industry, to transfer precast piece related information to precast production systems exported file to suit special requirements of mesh welding machines and its preprocessor software. The major purpose of the application is to split Unitechnik mesh data records into single files Unitechnik file can contain multiple sets of mesh per cast unit, which herewith will be split into single cast unit files.
In addition further Unitechnik specific data records can be modified. The Beam End Mark tool creates drawing part marks for beam end forces and moment connection symbols. The force values and moment connection information is pulled from the beam's End Conditions user-defined attribute tab.
The user has the flexibility to control the mark prefix, suffix and units of shear, moment and axial forces. Engineers and detailers can more effectively model materials handling conveyor trusses, tower supports and even idler and belt systems with this set of custom components.
View assembly contents and compare two assemblies based on position numbers. This supports the workflow where project participants will be combining, clash checking, and communicating with models from many disciplines and BIM applications in Tekla BIMsight but want to take advantage o the benefits of doing project estimation, scheduling, field layout management, facilities management and deployment, among many other tasks using Tekla Structures for Construction Management.
Structural detailers may also import IFC structural design models and convert them to native parts for detailing. You find it in the File menu. This tool allows you to select assemblies, parts, and bolts in a particular order to create a construction simulation of your Tekla Structures projects. This tool speeds up the everyday production of inputting beams that fill up floor bays as well as removes the need for the user to constantly have to load, and apply properties before placing new beams or modifying existing beams.
The user can simply select existing beams in the model, then double click on the attributes they want the beams to be modified to, or double click on a profile that they want the beams to be modified to. The tool was designed primarily to help with input of steel beams, but could be used on other material types. This tool allows users to easily create group dimensions on Cast Unit and General Arrangement drawings in the case where there are many single rebar or strand objects in the cast unit that traditionally are not automatically dimensioned by Tekla Structures and the user needs to manually add dimensions to.
This tool removes the need to pick each of the rebar dimension points and automatically does that for the user. This postprocessor provides a fix for reducing the remote SDNF issues. These files can be created in PMS, PDMS etc where the user may be using real-world co-ordinates to create their modelling requirements.
This program either sets the origin 0,0,0 to the first elements coordinates start position, or allows the user to define a remote reference position. Also the allows the exported file to be transfered back to the original position as well. See the zip file for documentation.
This tool will allow you to select concrete panels in the model, and lay them down horizontally as they would be poured in the field prior to being tilted up.
This tool is useful when trying to calculat form quantities of tilt up panels and managing site layout of to be poured panels. This tool allows Tekla Structures users to more easily work with tablet PCs and mobile and hand held computer technology to navigate and work in the model using finger touch and pen stylus command activation vs.
Motion Computing is one sample of a Tablet PCallows solution, then using like Connect, VMware View sequence Client you This tool youand to quickly pickapplications any object in theDesktop model and createoran installation can connect the iPad to a machine running Tekla Structures.
This is useful for Sales and Preconstruction presentations. This is similar to the Tekla Animator except it works with reference model objects, doesnt require user defined attributes or object representation, and can be used in conjunction with the reports created using the Template Editor to help make automated rules to define the installation sequence.
This tool allows you to generate an objects. Ring reinforcement for slab bay. Det ingr ven hjlpfiler. Komponenterna r skapade fr Tekla Structures Allow you to write and read layout points from model. Enable to import and export points from layout equipments e. Trimble LM80 on Nomad. This tool finds and then opens the various Tekla Structures related folders for you based on what kind of information you need.
This item is included in Tekla Structures installation starting from versions Cast in place custom components from Namvaran company. Zip-package includes instruction videos. An extension to model concrete slab topping and drainage. This tool is included in Tekla Structures installation in version Open navigation menu. Close suggestions Search Search. User Settings. Skip carousel. Carousel Previous. Carousel Next. What is Scribd? Explore Ebooks.
Bestsellers Editors' Picks All Ebooks. Explore Audiobooks. Bestsellers Editors' Picks All audiobooks. Explore Magazines. Editors' Picks All magazines. Explore Podcasts All podcasts. Difficulty Beginner Intermediate Advanced. Explore Documents. Tekla Extensions. Uploaded by Serban Ion Aurel. Document Information click to expand document information Description: Tekla Extensions.
Did you find this document useful? Is this content inappropriate? Report this Document. Description: Tekla Extensions. Flag for inappropriate content. Download now. Jump to Page. Search inside document. Label Tool Top in Form Marker Erection Sequencer Virtual Tour Shrink Tool Phase Numbering Hole Reservation Manager DoubleTee Components Truss Cambering Tool Wall panel reinforcement Component Manager Combine Part Marks Bolt Dimension Tools Version independent, Packaging Tool Advanced Grid Labels Publish to 3D-PDF Workplane Manager Weld Mark Merge Bolt Centerline Export User Defined Attribute Definitions Smart3D Interoperability Section Builder Version independent, Sketch sheets Hyperlink Manager UDA List Compare Objects Reference Model Scale Bar Checker Anchor Rod Tools Beam Extruder Node Adder CIP Reinforcement Volume of bolt holes Can Drawing Rotation Offset Tools Apex Haunch Modify Component Input Check And Manage Rebar Tool AutoSaveIt Crane Console Drawing snapshot creator Support Tool Wall Connection Components Data Extractor Version independent, Version Reference Object Import Scripts independent, Extend Materials Handling Components Reports and animations can then be produced and delivered to Project Managers or Site Crews This application assigns user defined attributes to any model object base on filters and rules.
This extension allows copying selected objects by rotation with 3 points This extension allows moving selected objects by rotation with 3 points. Application for managing void hole reservations ifc void objects created with HVAC software. Tool also includes possibility to add start and end point parts, door opening and drainage holes The comment tool allows users to communicate changes, questions and work assignments directly into the model. A corner connection, which places U-bars and additional recesses for shear force transfer.
This plugin creates a connection between two concrete walls. Plugin for reinforcing typical wall panel cases This tool is intended for creation and modification of floors build of precast filigree and hollow core slabs etc. Use this extended application to save and manage the work planes in a model.
Use this tool to merge identical weld marks in drawings. Tool for setting default font to be used in drawings. Use this tool to create special part symbols for parts in a drawing. Calculate the amount of edge preparations needed per plate. The Apex Haunch connects two rafters at the apex of a portal frame. Embed placing shows a preview distances before component is inserted This extension is used to create customer configuration.
Plugin component able to create U shaped edge reinforcements using bent meshes. Column Scheduler creates and updates graphical column schedules based on model selection. Use this tool to create penetration holes for reinforcement bars in a steel part.
Use this component to create no paint area surfacing between parts bolted together. Create the snapshots for the selected drawings for an open model. Pipe Doubler Plate connection creates a doubler plate between main part and the secondary part. This component creates a bolt connection on two channel parts. They are meant to be used with the Elementation tools This tool has been included in Tekla Structures installation from version Tool for inserting tie components into sandwich assembly.
Openings are taken into account. It may well additionally deal with the views and components from different information and it might probably additionally hyperlink contained in the design CAD drawings and may import one of these information.
You can even obtain Autodesk Revit 64 Bit Setup. That is full offline installer and standalone setup for Revit Extensions for Autodesk Revit The program and all files are checked and …. Your email address will not be published.
Save my name, email, and website in this browser for the next time I comment. Notify me of follow-up comments by email. Notify me of new posts by email. Share Facebook Twitter Stumbleupon Pinterest. Previous Tekla Structures Free Download.
No comments:
Post a Comment